The following procedures are intended as a guide for restoring the WILDFIRE system following various levels of system failure. Re-booting the computer and cycling power to the instrument or DSP in the Heurikon box in the computer room are not normal WILDFIRE operations and should not be done without proper consultation, or unless the specific conditions below are valid. These procedures are listed roughly in order of increasing severity, so unless a specific condition has occurred (e.g., DSP power cycling), try the less dramatic procedures first.
An extensive troubleshooting library may be consulted by entering trouble in any active window (except the Instrument Control window). The resulting interactive session can be used to diagnose and correct problems.