RESTART AFTER INSTRUMENT POWER INTERRUPTION:

If the power to the instrument was interrupted but the white Heurikon DSP box in the computer room remained powered up and the computer was not rebooted:

• In the Instrument Control window, enter startwf following the interactive startup procedure, turning the instrument power ON when requested
  1. Press <return>
  2. Answer n to the DSP box power question
  3. Answer y to the instrument power question
  4. Turn on the instrument power now
  5. Answer y to the instrument power being on
  6. Answer y to wanting windows
  7. Answer CIRIM (note it must be all caps) to the instrument selection
  8. Answer y to the question about wanting motor control
• The downloading procedure should complete with a ``%'' prompt
• Type fwinit to initialize the filter wheel
• Type filter blank to select the dark filter
• Enter setup cirim, answering 'y' to question about detector activation
• Enter the proper bias for the detector (nominal 0.90)
• Enter puse [parameter_file] to restore the parameter file active before the crash
• Verify ``pixel_dir'', ``header_dir'', and ``nextpic'' with plist or ped to make sure data will still be going to the desired location and will not overwrite existing data
• Reload any scripts with the source command
• Continue observing